Musty odor with no visible mold
We use thermal imaging and boroscope cameras to find the moisture source and any hidden growth, then test before we remove. You get a clear answer, not a guess.
IICRC-certified crews, 24/7 response, upfront pricing across Brazos County
Black Mold Removal Bryan TX Done Right the First Time
When you search for Black Mold Removal Bryan TX, you need a crew that finds the moisture source, not just the stain. We handle emergency black mold removal Bryan TX for homes and businesses across Brazos County, from slab leaks in Oakwood to roof leaks after spring storms. We test, contain, remove, and dry so the mold does not come back.
Careful work. Honest options.
About this service
What Black Mold Removal Bryan TX Actually Involves
Black mold removal in Bryan TX is the process of locating active mold growth, stopping the moisture source feeding it, and physically removing contaminated materials under containment. It is not a spray-and-wipe job. We use moisture meters, thermal imaging cameras, and boroscope cameras to find hidden water damage behind drywall, under hardwood flooring, and inside wall cavities where mold colonies grow out of sight. Once we map the spread, we build negative air containment, run HEPA filtration, and remove affected drywall, insulation, and baseboards before treating the framing with an antimicrobial solution.
Bryan sits in a humid subtropical pocket of Central Texas where summer dew points stay above 70 degrees and spring storms dump inches of rain in hours. That combination turns a slow pipe burst, a slab leak, or a roof leak into mold growth in as little as 48 to 72 hours. If you are searching for black mold removal near me Bryan after a flood damage event or a sewage backup, the clock matters. Our team responds 24/7, and we document every step for your insurance claim using Xactimate.
- ✓ 24/7 Emergency Response
- ✓ Insurance Documentation
- ✓ Containment That Works
- ✓ Clearance Testing
What's included
What Our Black Mold Removal Service Includes
Every job is scoped to the specific damage, but most Bryan residential jobs include the following. If your situation needs something outside this list, we will tell you upfront and price it before we start.
✓
Full Moisture Inspection
We check every room with a moisture meter, thermal imaging camera, and hygrometer to map where water has traveled. This usually takes 60 to 90 minutes and tells us exactly where mold is likely growing.
✓
Containment and HEPA Filtration
Plastic sheeting and a negative air machine isolate the work zone. HEPA filtration scrubs airborne spores so they do not settle in clean areas of your home during removal.
✓
Removal of Contaminated Materials
Affected drywall, insulation, carpet padding, and baseboards are removed, bagged, and hauled off-site. Structural framing is wire-brushed and treated with antimicrobial solution.
✓
Drying and Dehumidification
We place Dri-Eaz and Phoenix dehumidifiers and air movers, then monitor with hygrometers daily until structural moisture returns to pre-loss levels. Drying typically runs two to five days.
✓
Clearance Verification
Final moisture readings and, when required, third-party air sampling confirm the space is dry and clear. You get written documentation for your records and your insurance claim.
✓
Rebuild and Finish
We hang new drywall, texture, paint, and reinstall trim and baseboards. You get a finished room, not a construction zone, when we pack up and leave.
How it works
Our Black Mold Removal Process
01
Inspection and Testing
A certified technician arrives with a moisture meter, thermal imaging camera, and hygrometer to trace the moisture source. We check wall cavities with a boroscope camera, test humidity levels room by room, and identify the mold species when visible growth is present. This inspection usually takes 60 to 90 minutes.
02
Containment Setup
We isolate the affected area with 6-mil plastic sheeting and run a negative air machine with HEPA filtration. This keeps airborne spores from drifting into unaffected rooms. HVAC registers get sealed, and we set up a decontamination entry so technicians do not track spores through your house.
03
Removal and Disposal
Contaminated drywall, insulation, carpet padding, and baseboards come out and go into sealed bags. Structural framing gets wire-brushed and treated with an antimicrobial solution. We follow IICRC AMRT protocols, and every load of debris is hauled off-site the same day.
04
Drying and Dehumidification
Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and air movers run until structural moisture reads at or below pre-loss levels. Depending on the scope, drying takes two to five days. We check readings daily and adjust equipment placement as walls dry from the inside out.
05
Clearance and Rebuild
Final moisture readings and, when required, third-party air clearance confirm the job is done. We then handle drywall, paint, and trim so your home looks finished, not patched. Most Bryan jobs go from containment removal to paint-ready in seven to ten days.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Thermal Imaging Camera
Detects temperature differences behind walls and under floors to locate hidden moisture without tearing into finished surfaces.
Moisture Meter and Hygrometer
Measures moisture content in drywall, wood, and concrete, and tracks relative humidity in the air so we know when drying is complete.
Boroscope Camera
Slides into wall cavities and behind baseboards to confirm mold growth and moisture in spaces you cannot see from the outside.
Negative Air Machine with HEPA Filtration
Maintains negative pressure inside containment and filters airborne spores so they do not migrate into clean areas of your home.
Dri-Eaz and Phoenix Restoration Equipment
Commercial-grade dehumidifiers and air movers that pull moisture out of structural materials faster than consumer units ever could.
Ozone Generator
Neutralizes musty mold odors at the molecular level after removal and drying are complete.
Xactimate Estimating Software
Builds line-item estimates that match the format insurance adjusters use, which speeds up claim approval.
Real results
Before and after.
Bathroom Ceiling Mold After Roof Leak
Before
A slow roof leak above a Briarcrest bathroom soaked the ceiling drywall for three weeks before dark staining appeared. Moisture readings showed saturation 18 inches beyond the visible stain, and mold had colonized the ceiling cavity and insulation above.
After
We removed 60 square feet of contaminated drywall and insulation, treated the joists with antimicrobial solution, and dried the cavity over four days. Clearance readings confirmed dry structure, and we hung, textured, and painted new drywall. Total job: six days.
Crawl Space Mold After Storm Flooding
Before
Heavy spring rain pushed water into a pier-and-beam crawl space in Downtown Bryan. Standing water sat for five days before the homeowner noticed a musty smell inside. Insulation was saturated, and mold covered roughly 400 square feet of floor joists and subfloor.
After
We pumped out standing water, removed all saturated insulation, wire-brushed and treated the joists and subfloor, and ran commercial dehumidifiers for six days. Final moisture readings were at pre-loss levels, and new insulation went in after clearance. Job completed in eight days.
Kitchen Mold After Dishwasher Supply Line Failure
Before
A dishwasher supply line failed overnight in a Copperfield home, soaking the cabinet base, subfloor, and 80 square feet of adjacent hardwood. Mold appeared on the cabinet toe kick and subfloor within four days. Homeowner called us on day five.
After
We contained the kitchen, removed the affected toe kick and a section of hardwood, treated the subfloor and cabinet framing with antimicrobial, and dried the area over three days. New hardwood was installed and finished to match. Job completed in seven days.
Problems we solve
Mold Problems We Solve for Bryan Homeowners
Most mold calls we get in Bryan start with a water event the homeowner did not fully dry. Here are the situations we see most often and how we handle them.
Ask a pro →↗
Black staining on bathroom or kitchen walls
We open the wall, find the leak or condensation issue, remove contaminated drywall, treat the framing, and dry the cavity. Then we fix the moisture problem so it does not come back.
Mold in crawl space after heavy rain
We pump out standing water, remove saturated insulation, treat joists and subfloor with antimicrobial, and dry the space with commercial dehumidifiers. Most crawl space jobs clear in five to seven days.
Mold after a slow pipe or appliance leak
We trace the leak with moisture meters, open the affected area, remove mold-contaminated materials, and dry the structure. We also repair the leak source so the problem does not repeat.
Proof you can check
Licensed, Certified, and Local
✓
IICRC WRT (Water Restoration Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC ASD (Applied Structural Drying)Institute of Inspection, Cleaning and Restoration Certification
✓
IICRC AMRT (Applied Microbial Remediation Technician)Institute of Inspection, Cleaning and Restoration Certification
✓
EPA Lead-Safe Certified FirmU.S. Environmental Protection Agency
✓
TDLR RegisteredTexas Department of Licensing and Regulation
Customer reviews
What Bryan Customers Say
★★★★★
“A slab leak soaked our hallway and we found black mold behind the baseboards about a week later. Bryan Restoration Pros had containment up the same day I called. They pulled the drywall, treated the framing, and dried everything in four days. Insurance covered most of it because their Xactimate paperwork was clean.”
MT
Marcus T.Homeowner, Oakwood
✓ Verified“
★★★★★
“Our attic had mold from a slow roof leak we did not know about. They used a thermal camera to find the leak, removed the wet insulation, and treated the whole attic. The crew was respectful, wore shoe covers, and cleaned up better than they found it. Would call them again.”
SK
Sandra K.Homeowner, Briarcrest
✓ Verified★★★★★
“We manage several rental units and had a tenant report musty smells after a pipe burst. Bryan Restoration Pros handled inspection, removal, and the rebuild on one invoice. They kept us updated daily and finished in six days. Tenants were back in the unit without a second complaint.”
DR
David R.Property Manager, Downtown Bryan
✓ VerifiedMost residential jobs in Bryan run $1,200 to $6,500 in 2026, depending on square footage affected and how many materials come out. A single bathroom ceiling might land near $1,200, while a crawl space with 800 square feet of contaminated insulation can push past $6,000. We give you a written scope and price before work starts.
Yes. Stachybotrys and other toxigenic molds release spores and mycotoxins that trigger respiratory issues, headaches, and allergic reactions, especially in children, elderly residents, and anyone with asthma. Bryan's humidity makes indoor mold growth common after any water event. If you smell a musty odor or see dark staining near a leak, get it tested.
A typical residential job takes three to seven days from containment to clearance. Removal itself is usually one to two days. The drying phase runs two to five days depending on how much moisture is in the framing. Larger crawl space or commercial jobs can run 10 to 14 days.
Yes. We answer the phone 24/7 and dispatch crews for emergency black mold removal Bryan TX calls, including nights, weekends, and holidays. If you have standing water feeding mold growth right now, call (979) 325-7976 and we will get drying equipment running the same day.
More services
Related Services
Water Damage RestorationMold needs moisture. We extract standing water, dry structural materials, and restore your Bryan home to pre-loss condition, cutting off the water supply that feeds mold colonies before they take hold.Explore →
Emergency Water RemovalWhen a pipe burst or appliance leak floods your floor, every hour counts. Our emergency crews pull water fast, which is the single most effective way to prevent black mold growth in Bryan homes.Explore →
Flood Damage CleanupBryan storm flooding pushes contaminated water into crawl spaces and ground-floor rooms. We handle extraction, sanitization, and structural drying so flood damage does not turn into a mold remediation job.Explore →
Water Extraction ServicesTruck-mounted and portable extraction units pull hundreds of gallons from carpet, hardwood, and subfloor. Fast extraction shortens the drying window and reduces the odds of mold growth in Bryan.Explore →
Basement Water RemovalBryan basements and below-grade rooms trap humidity. We pump out standing water, dry the space with dehumidifiers, and treat surfaces so mold does not colonize the walls and joists.Explore →
Crawl Space Water RemovalCrawl spaces are the most common mold site we see in Bryan. We remove standing water, pull saturated insulation, and dry the space to stop mold growth at the source.Explore →
Sewage Backup CleanupSewage backups introduce bacteria and moisture in one event. We extract, disinfect, and dry the area, then verify with moisture meters so mold never gets a chance to start.Explore →
Storm Damage RestorationHail, wind, and driving rain drive water into Bryan roofs and walls. We tarp, extract, and dry, then handle the mold inspection and removal if growth has already started.Explore → Ready when you are
Get Black Mold Removal Bryan TX Crews on the Way
Mold doubles in coverage every 24 to 48 hours when moisture is present. Call (979) 325-7976 and we will dispatch an IICRC-certified crew, give you a written scope, and start drying today. Licensed, insured, and serving Bryan since 2001.
Call Now (979) 325-7976 →
Request an appointment
Contact Bryan Restoration Pros
If you have water damage, call us at (979) 325-7976. We answer 24/7 and dispatch crews around the clock. If you prefer email, send us a message at info@bryanrestorationpros.com and we will get back to you quickly. We serve all of Bryan and Brazos County, including ZIP codes 77801, 77802, 77803, 77805, 77807, and 77808.
Call anytime(979) 325-7976Email the officewaterdamagebryantx@gmail.com
Office hoursOpen 24 hours · 7 days a week