Burst pipe or supply line failure
We shut off the source, extract standing water with truck-mounted units, and dry the wall cavities and subfloor. If the loss is Category 1, we often save the drywall. We document everything for your carrier.
When a pipe bursts at 2 a.m. or a water heater lets go before a holiday, Water Extraction Services Bryan TX get the standing water out before it ruins your floors, walls, and air quality. We handle residential and commercial jobs across Bryan, Texas, from Downtown Bryan bungalows to Carter Creek two-stories. One call, and our crew is on the way with truck-mounted extraction units and drying gear.

Water Extraction Services Bryan TX is the physical removal of standing water from your floors, walls, and subfloor using truck-mounted and portable extraction units, followed by calibrated drying. It is not a shop vac and a box fan. We pull water with high-CFM extractors, then map moisture with a moisture meter and thermal imaging camera to find what the eye misses. Every job starts with a moisture map and ends when readings match a dry standard.
Bryan sits on heavy clay soil, and our storm season dumps water fast. Slab leaks, roof leaks, and sewage backups are the calls we get most. Left alone, standing water wicks into drywall, carpet padding, and baseboards within hours, and mold growth can start in 24 to 48 hours. That is why we run emergency water extraction Bryan TX around the clock, seven days a week, with no overtime charge for nights or weekends.
Every extraction job includes the core scope below. Repairs like drywall, paint, and flooring replacement are quoted separately once the structure is dry and we know what can be saved.
A live dispatcher answers at any hour. We stage crews across Brazos County so most Bryan addresses see a technician in 60 to 90 minutes, including nights, weekends, and holidays.
We walk the space with a moisture meter, thermal imaging camera, and boroscope camera, then hand you a room-by-room map of wet and dry zones before extraction begins.
High-CFM truck-mounted and portable extraction units pull standing water from carpet, hardwood, tile, and concrete. Weighted heads press water out of carpet padding to save the floor when possible.
After extraction, we apply antimicrobial solution to affected surfaces to stop mold growth. Category 2 and Category 3 losses get EPA-registered disinfectant and full documentation.
Air movers, dehumidifiers, and negative air machines are positioned based on the moisture map. We size the equipment to the space, not to a flat rate, and adjust each day.
We log moisture readings with a hygrometer and infrared thermometer every day, adjust gear, and give you a final report with photos and dry-standard readings for your insurance file.
You call (979) 325-7976 and describe what happened. We ask about the water source, how long it has been sitting, and whether it smells like sewage. That tells us what gear to load. Most Bryan addresses see a crew within 60 to 90 minutes.
We walk the space with a moisture meter, thermal imaging camera, and boroscope camera to find hidden water behind baseboards and under hardwood. You get a room-by-room map showing wet zones and dry zones before we touch anything.
Truck-mounted and portable extraction units pull standing water from carpet, hardwood, tile, and concrete. A weighted extraction head presses water out of carpet padding. Most residential jobs are fully extracted in two to four hours.
We position air movers and dehumidifiers based on the moisture map, then check readings daily. A typical Bryan home dries in three to five days. We adjust equipment each visit and remove gear only when readings hit the dry standard.
Once the structure is dry, we walk the job with you, document final readings, and discuss any drywall, baseboard, or paint repairs. If you want us to handle the rebuild, we schedule it. If not, you have a clean, dry, documented space.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
High-CFM vacuum that pulls hundreds of gallons of standing water from carpet, hardwood, and concrete in a single pass.
Measures moisture content in materials and relative humidity in the air so we know exactly when the structure is dry.
Reveals hidden water behind walls, under floors, and in ceiling cavities that the eye cannot see.
Inspects inside wall cavities and crawl spaces to confirm water paths and check for mold growth.
Drive evaporation off wet surfaces so dehumidifiers can pull moisture out of the air.
Pull hundreds of pints of water per day out of the air, sized to the space and the loss category.
Contain mold spores during remediation and neutralize odors after sewage or long-standing water losses.
A supply line under the sink let go overnight and soaked the kitchen floor, baseboards, and the wall cavity behind the cabinets. Water had been sitting about six hours when the homeowner called.
We extracted 40 gallons of standing water, pulled saturated baseboards, dried the wall cavity with air movers and a dehumidifier, and had the kitchen at dry standard in four days. Cabinets were saved.
A main line backup pushed Category 3 water into two ground-floor units. Carpet, padding, and the bottom 12 inches of drywall were contaminated and had to come out.
We extracted, removed contaminated materials, treated with EPA-registered disinfectant, and dried the units in five days. Both units were re-occupied the following week after drywall and paint repairs.
A slab leak pushed water up through the hardwood floor in a hallway. The homeowner noticed cupping boards and a musty smell about two weeks after the first sign.
We mapped the wet zone with a thermal imaging camera, extracted through the floor, ran desiccant drying for six days, and replaced 60 square feet of cupped hardwood. No mold growth was found.
Most Bryan water calls fall into a handful of categories. Here is what we see and how we handle each one.
Ask a pro →We shut off the source, extract standing water with truck-mounted units, and dry the wall cavities and subfloor. If the loss is Category 1, we often save the drywall. We document everything for your carrier.
We use a thermal imaging camera and moisture meter to map the wet zone, extract through the flooring surface, and run desiccant drying to pull moisture out of the slab and subfloor.
We suit up in PPE, extract, cut out contaminated drywall and flooring, treat with EPA-registered disinfectant, and dry the structure. Full documentation goes to your adjuster.
We trace the leak with a boroscope camera and thermal imaging camera, extract trapped water, dry the ceiling cavity, and repair the drywall once readings hit the dry standard.
“A supply line let go under our kitchen sink on a Sunday night. Bryan Restoration Pros had a crew here in about 75 minutes. They extracted the water, set air movers and a dehumidifier, and checked readings every day for four days. The Xactimate scope they sent my adjuster got the claim approved without any back-and-forth.”
Marcus T.Homeowner, Carter Creek
✓ Verified“We had a slab leak that soaked the hallway carpet before we noticed. They pulled the water out with a weighted extraction head, saved the carpet, and replaced the padding. The moisture meter readings they logged each day were what convinced me they were not just guessing. Dry in five days.”
Danielle R.Homeowner, Oakwood
✓ Verified“Sewage backup in a four-unit building on a Friday afternoon. Their crew showed up in PPE, extracted, cut out the contaminated drywall, and disinfected everything. They worked around our tenants and had the units dry by Wednesday. Documentation was clean enough that our carrier paid the full scope.”
Ken W.Property Manager, Downtown Bryan
✓ VerifiedMost residential water extraction jobs in Bryan run $450 to $1,800 for extraction and the first few days of drying, with larger or sewage-contaminated losses going higher. The biggest cost drivers are square footage affected, water category, and how long the water sat. We give you a written scope before we start, and we bill most insurance carriers directly.
Extraction itself usually takes two to four hours for a typical Bryan home. Full structural drying after extraction runs three to five days, sometimes longer for hardwood, plaster, or a saturated slab. We check moisture readings daily and pull equipment only when the structure hits the dry standard.
Yes. We run 24/7 emergency water extraction Bryan TX and most calls get a crew on-site within 60 to 90 minutes. Same-day water extraction for flooded homes Bryan Texas is standard for us, including nights, weekends, and holidays. There is no overtime surcharge for after-hours calls.
Yes, and we do it with weighted extraction heads that press water out of the carpet and padding. If the padding is saturated or the water is contaminated, we pull it and replace it. Clean-water carpet usually saves; sewage or Category 3 water means the carpet and padding come out and the subfloor gets treated.
Every hour water sits, the repair bill grows. Call Bryan Restoration Pros at (979) 325-7976 and we will have a certified crew at your door in 60 to 90 minutes. Licensed, insured, and 25 years in Brazos County.
Call for emergency service (979) 325-7976 →If you have water damage, call us at (979) 325-7976. We answer 24/7 and dispatch crews around the clock. If you prefer email, send us a message at info@bryanrestorationpros.com and we will get back to you quickly. We serve all of Bryan and Brazos County, including ZIP codes 77801, 77802, 77803, 77805, 77807, and 77808.