Water Damage Restoration in Bryan starts with a truck at your door, not a voicemail. We handle burst pipes, slab leaks, roof leaks and storm water for homes and businesses across Brazos County. Our water damage cleanup Bryan TX crews extract standing water, dry the structure and repair what got soaked, with same-day service and direct insurance billing. Call (979) 325-7976.
Water Damage Restoration in Bryan is the process of extracting standing water, drying the structure to verified moisture levels, and repairing or replacing damaged materials so your home or business is safe to occupy again. It is not just shop-vac work. We map the moisture with a moisture meter and thermal imaging camera, pull wet carpet padding and baseboards, set Dri-Eaz dehumidifiers and air movers, and document every reading until the drywall, hardwood flooring and insulation hit dry standard.
Bryan sits in a wet part of Central Texas. Spring storms dump inches in an hour, summer humidity keeps walls sweating, and winter freezes split the copper in older pier-and-beam homes. That mix means pipe burst calls in January, roof leak calls in April, and slab leak calls in August. When you need a Bryan TX water damage restoration service that answers at 2 a.m., we are already loaded and rolling. Most jobs in 77801 and 77802 get a crew on site the same day you call.
Every Water Damage Restoration in Bryan job includes the full dry-out: inspection, extraction, drying, monitoring and sanitization. Repairs like drywall, paint, flooring and cabinetry are quoted after the structure is dry, since we cannot know the full repair scope until we see what dries and what does not. You get a written scope before we start.
We use a moisture meter, thermal imaging camera and boroscope camera to find every wet area, including hidden water behind baseboards and inside wall cavities. You get photos and readings before any equipment is set.
Truck-mounted and portable extraction units pull standing water from carpet, hardwood, tile and subfloor. We remove saturated carpet padding and cut out drywall that has wicked past the point of drying. This step usually takes two to four hours.
We position Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and air movers, then check readings daily with a hygrometer. Most homes dry in three to five days. You get the full moisture log at the end for your records and your insurance claim.
After extraction, we apply antimicrobial solution to affected framing and studs, then disinfect surfaces with EPA-registered products. This step is standard on every job and mandatory after sewage backup or flood water intrusion.
We use ozone generators and hydroxyl equipment to neutralize musty odors at the source. Most homes are odor-free within 24 hours of treatment. We do not just mask the smell with air freshener.
Once the structure is dry, we replace drywall, insulation, baseboards, paint and flooring. We match existing finishes so the repair blends in. One crew handles the whole job, so you are not waiting on a handoff between contractors.
You call (979) 325-7976, we ask what happened and where the water is coming from, and we dispatch the nearest crew. In most of Bryan we are on site within 60 to 90 minutes. If the source is still running, we walk you through shutting off the main while we are in route.
We inspect with a moisture meter, thermal imaging camera and boroscope camera to find hidden water behind baseboards, under hardwood flooring and inside wall cavities. You get a written scope with photos and readings before any equipment gets set.
Truck-mounted extraction units pull standing water fast. We remove saturated carpet padding, lift wet baseboards, and cut out drywall that has wicked past the point of drying. This step usually takes two to four hours on a typical residential job.
We position Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and air movers to pull moisture out of the structure. We check readings daily and adjust equipment placement. Most homes dry in three to five days; heavy saturation can run seven.
Once the structure hits dry standard, we replace drywall, insulation, baseboards, paint and flooring. We test everything, hand you the final moisture log, and walk the job with you before we pack up. One point of contact from first call to final coat of paint.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
We use these to measure moisture content in drywall, wood and subfloor, and to track relative humidity in the air. Daily readings tell us when the structure has hit dry standard.
Infrared imaging shows us temperature differences behind walls and under floors, which reveals hidden water we cannot see with the naked eye. It is how we find slab leaks and slow supply-line drips.
A boroscope lets us look inside wall cavities and under cabinets without tearing everything out. We use it to confirm the extent of moisture before we cut drywall.
Low-grain refrigerant and desiccant dehumidifiers pull moisture out of the air so wet materials can dry from the inside out. We size them to the cubic footage of the affected area.
Air movers keep air flowing across wet surfaces to speed evaporation. Negative air machines with HEPA filtration contain dust and mold spores during demolition.
Our truck-mounted extraction units pull hundreds of gallons an hour from carpet, hardwood and subfloor. They are the fastest way to remove standing water before it spreads.
These neutralize musty odors at the source after water damage. We run them in unoccupied spaces and follow manufacturer safety protocols before reoccupancy.
A supply line under the kitchen sink burst at 11 p.m. and ran for hours before the homeowner woke up. Standing water covered the kitchen and hallway, and the cabinet toe kick and baseboards were saturated.
We extracted 40 gallons, removed saturated baseboards and toe kick, and dried the structure in four days. We replaced the baseboards, repainted, and the kitchen was back in service within a week. Insurance covered the full scope.
A spring storm pushed water into the crawl space of a 1940s pier-and-beam home. The joists and subfloor were wet, and the homeowner noticed a musty smell two days later.
We pumped out the standing water, dried the joists and subfloor with air movers and dehumidifiers, and treated the framing with antimicrobial solution. Moisture readings hit dry standard in five days.
A root intrusion in the sewer line caused a backup into a ground-floor bathroom. Contaminated water spread into the hallway carpet and soaked the baseboards.
We removed the contaminated carpet and padding, cut out wet baseboards, disinfected with EPA-registered products, and dried the structure in three days. The unit was re-rented within two weeks.
Most Bryan water damage calls fall into a handful of categories. Here are the ones we see most often, what happens if you ignore them, and how we fix them.
Ask a pro →We locate the leak with a moisture meter and thermal imaging camera, shut off the source, extract water, and dry the cavity. We cut out wet drywall and insulation, treat framing with antimicrobial solution, and rebuild once readings hit dry standard.
We trace the leak, dry the attic and ceiling cavity with air movers and dehumidifiers, replace saturated insulation, and repair the drywall and paint. We also document the source for your insurance claim so the roof repair gets covered.
Our crews suit up in PPE, remove contaminated materials, disinfect with EPA-registered products, and dry the structure. We follow OSHA and IICRC S500 protocols, and we document everything for your insurance claim.
We pull the appliance, find the source with a boroscope camera, dry the subfloor, and replace warped boards. We also check the surrounding area with a moisture meter to make sure the leak did not spread further than it looks.
“A pipe burst under our kitchen sink at 11 p.m. on a Sunday. Bryan Restoration Pros had a crew at our door in about an hour. They pulled the water, set dehumidifiers, and had the drywall and cabinets repaired within a week. Insurance covered it and they handled all the paperwork. Could not have asked for a smoother process.”
Marcus T.Homeowner, Carter Creek
✓ Verified“Our 1940s house has pier-and-beam floors and the crawl space flooded after a big storm. They pumped it out, dried the joists, and treated everything for mold. The moisture readings they gave us were detailed enough that our adjuster approved the claim without a second visit. Honest, professional crew.”
Sandra K.Homeowner, Downtown Bryan
✓ Verified“We manage several rental units and had a slab leak flood two of them at once. Bryan Restoration Pros handled both, coordinated with the tenants, and finished the repairs on schedule. Their Xactimate scope matched what our carrier expected, so there were no delays. They are our first call now.”
David R.Property Manager, The Traditions
✓ VerifiedMost residential jobs in Bryan run $1,200 to $4,500 in 2026, with small appliance leaks on the low end and flooded rooms with drywall removal on the high end. Commercial jobs and sewage backup cleanup cost more. We bill insurance directly when the loss is covered, and you get a written scope before we start so there are no surprises.
Every job includes inspection with a moisture meter and thermal imaging camera, water extraction, removal of unsalvageable materials, structural drying with dehumidifiers and air movers, antimicrobial application, daily moisture monitoring, and a final dry-standard verification. Repairs like drywall, paint and flooring are quoted separately once the structure is dry.
Yes. We run 24/7 water damage restoration and cleanup in Bryan TX, including nights, weekends and holidays. Most Bryan addresses see a crew within 60 to 90 minutes of your call. If the water is still running, we walk you through shutting off the main while we are in route.
Extraction and demolition usually take one day. Structural drying runs three to five days for most homes, up to seven for heavy saturation or slab foundations. Repairs after drying add another three to ten days depending on scope. You get a written timeline after the initial inspection, and we update it as readings come in.
Emergency Water RemovalWhen water is still rising, emergency water removal is the first step of any Water Damage Restoration in Bryan. We pull standing water fast with truck-mounted units, usually within 90 minutes of your call, so the damage stops spreading into walls and floors.Explore →
Flood Damage CleanupBryan storm flooding brings silt, debris and contaminated water into homes. Our flood damage cleanup crews extract, sanitize and dry, then handle the repairs. We work storm claims regularly and know what adjusters in Brazos County expect to see documented.Explore →
Water Extraction ServicesWater extraction services are the heavy-lift phase of Water Damage Restoration in Bryan. Truck-mounted and portable extraction units pull hundreds of gallons an hour from carpet, hardwood and subfloor, cutting drying time and reducing the chance of warping or mold.Explore →
Basement Water RemovalBryan basements and below-grade rooms collect water from slab leaks, sump failures and heavy rain. We pump it out, dry the space with dehumidifiers, and check the walls with a moisture meter to catch hidden saturation before it turns into mold.Explore →
Crawl Space Water RemovalPier-and-beam homes around Downtown Bryan often have wet crawl spaces after storms. We remove standing water, dry the joists and subfloor, and treat framing with antimicrobial solution. Left alone, crawl space moisture warps floors and feeds mold growth year-round.Explore →
Sewage Backup CleanupSewage backup is a biohazard, not a mop job. Our crews suit up in PPE, remove contaminated materials, disinfect with EPA-registered products, and dry the structure. We follow OSHA and IICRC S500 protocols so your home is safe to reoccupy.Explore →
Storm Damage RestorationSpring squall lines and hail hit Bryan hard. After the storm passes, we tarp roofs, board windows, extract water, and handle the full repair. Storm damage restoration pairs with our Water Damage Restoration in Bryan service when rain gets inside before the roof is patched.Explore →
Roof Leak Water Damage RepairA roof leak can soak insulation and ceiling drywall for weeks before you notice a stain. We trace the leak, dry the attic and ceiling cavity, replace wet insulation, and repair the drywall. We also document the source for your insurance claim.Explore →We are IICRC-certified, TDLR-licensed, insured, and answering the phone 24/7. Call (979) 325-7976 and a crew will be on the way with extraction and drying equipment. Same-day service across Bryan and Brazos County.
Call Now (979) 325-7976 →If you have water damage, call us at (979) 325-7976. We answer 24/7 and dispatch crews around the clock. If you prefer email, send us a message at info@bryanrestorationpros.com and we will get back to you quickly. We serve all of Bryan and Brazos County, including ZIP codes 77801, 77802, 77803, 77805, 77807, and 77808.