Burst pipe behind a wall
We use a boroscope camera and thermal imaging camera to find hidden moisture, cut out affected drywall, dry the framing, and replace insulation and drywall. Most jobs are dry in three to five days.
Residential Water Damage Restoration in Bryan means getting the water out, drying the structure, and repairing what got soaked. We handle burst pipes, slab leaks, roof leaks, and sewage backups across Bryan, Texas. Our IICRC-certified crews arrive with extraction units and drying equipment, document everything for your insurance claim, and don't leave until your home tests dry. Call (979) 325-7976 any hour.

Residential Water Damage Restoration in Bryan is the process of extracting standing water, drying structural materials, and repairing a home after a leak, burst pipe, or flood. We start by finding the source with a moisture meter and thermal imaging camera, then pull water with truck-mounted extraction units. Air movers and dehumidifiers dry the framing, drywall, and flooring. We track moisture daily with a hygrometer until your home hits pre-loss readings, usually in three to five days.
Bryan homes take on water in predictable ways. Freezes crack supply lines, summer storms push water through roof valleys, and older cast iron drains in Downtown Bryan and Bryan Heights back up into tubs and showers. If you're searching for home water damage restoration Bryan TX after a slab leak or appliance failure, we've handled those calls since 2001. We know which neighborhoods flood first and which materials dry slowest in Brazos County humidity.
Every job is different, but here's what's typically covered when you hire us for residential water damage restoration in Bryan. We handle extraction, drying, and repairs. If your insurance covers it, we bill them directly.
We pull standing water from carpet, hardwood, and concrete with truck-mounted and portable extraction units. For sewage backup or flood damage, we apply antimicrobial solution first.
Air movers and dehumidifiers dry framing, drywall, and subfloor. We monitor moisture daily with a hygrometer and adjust equipment until your home tests dry, usually in three to five days.
We use moisture meters, thermal imaging cameras, and boroscope cameras to find hidden water. Every reading is logged and photographed for your insurance claim.
We apply antimicrobial solution to affected areas to stop mold growth. If mold is already present, we contain the area with plastic sheeting and negative air machines before removal.
We replace drywall, insulation, baseboards, and paint. If hardwood flooring or carpet padding is ruined, we remove and replace it. One crew from start to finish.
We build a line-item scope in Xactimate that adjusters accept. You get photos, moisture logs, and a complete claim package so your claim moves through faster.
You call (979) 325-7976 and describe what happened. We ask about the water source, how long it's been running, and whether sewage is involved. A crew dispatches immediately. You get a call or text with the technician's name and estimated arrival time, usually 60 to 90 minutes.
We walk the home with a moisture meter, thermal imaging camera, and hygrometer. We check behind baseboards, under flooring, and inside walls with a boroscope camera. You get a written scope of affected areas and a clear explanation of what needs to happen before we start any work.
Truck-mounted and portable water extraction units pull standing water from carpet, hardwood, and concrete. For sewage backup or flood damage, we apply antimicrobial solution first. Extraction typically takes two to four hours depending on volume and how far the water traveled.
We position air movers and dehumidifiers to dry framing, drywall, and subfloor. Desiccant dehumidifiers handle tight spaces like crawl spaces and closets. We monitor moisture daily with a hygrometer and adjust equipment until your home reads dry, usually three to five days.
Once dry, we replace drywall, insulation, baseboards, and paint. If hardwood flooring or carpet padding needs replacement, we handle that too. You get a final walkthrough with moisture readings documented, plus photos for your records and your insurance company.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Measures moisture content in drywall, wood, and concrete. We use it to find hidden water and confirm when materials are dry.
Detects temperature differences behind walls and under floors to locate hidden moisture without cutting into surfaces.
Pulls moisture from the air to speed drying. We use refrigerant and desiccant models depending on the space and humidity level.
Circulates air across wet surfaces to speed evaporation. We position them based on material type and room layout.
Truck-mounted and portable units that pull standing water from carpet, hardwood, and concrete. Essential for fast water removal.
Measures relative humidity in the air. We use it to track drying progress and adjust equipment daily.
Inspects inside walls and crawl spaces without demolition. We use it to find hidden water and confirm the leak source.
A supply line burst behind the kitchen wall and soaked drywall, insulation, and hardwood flooring. Water had been running for hours before the homeowner noticed.
We extracted water, dried the framing, and replaced drywall, insulation, and baseboards. Hardwood dried without cupping. Moisture readings confirmed the home was dry in four days.
A cast iron drain backed up into the tub and shower, flooding the bathroom with Category 3 water. The flooring and baseboards were contaminated.
We extracted, disinfected with EPA-registered products, and removed contaminated materials. New flooring and baseboards were installed. The home passed a final inspection with no mold growth.
A storm pushed water through the roof and soaked the ceiling and attic insulation. The ceiling was stained and sagging in one corner.
We tarped the roof, extracted water, and dried the attic and ceiling. Insulation and drywall were replaced, and the ceiling was repainted. Moisture readings confirmed the attic was dry in three days.
Water damage shows up in different ways depending on the source. Here are the problems we see most often in Bryan homes.
Ask a pro →We use a boroscope camera and thermal imaging camera to find hidden moisture, cut out affected drywall, dry the framing, and replace insulation and drywall. Most jobs are dry in three to five days.
We locate the leak, extract water, and dry the slab and flooring with controlled humidity. If hardwood is cupped, we dry it slowly and refinish. Severe cases get replaced.
We extract, disinfect with EPA-registered products, and remove contaminated materials. Our IICRC AMRT technicians handle the job safely and document it for insurance.
We tarp the roof, extract water, and dry the attic and ceiling. We replace insulation and drywall, then repaint. We also document everything for your insurance claim.
“A pipe burst under our kitchen sink at 11 p.m. We called Bryan Restoration Pros and a technician was here in about an hour. They extracted the water, set up air movers and a dehumidifier, and checked moisture every day for four days. They also handled the insurance paperwork. We didn't have to argue with the adjuster at all.”
Sarah M.Homeowner, Downtown Bryan
✓ Verified“Our water heater leaked while we were out of town. We came home to wet hardwood flooring and soggy baseboards. The crew dried everything without warping the wood, replaced the baseboards, and repainted. They were professional and explained every step. I'd call them again without hesitation.”
James R.Homeowner, The Traditions
✓ Verified“After a storm, water came through our roof and soaked the ceiling and insulation. Bryan Restoration Pros tarped the roof, extracted the water, and replaced the insulation and drywall. They used a thermal imaging camera to find moisture we couldn't see. The ceiling looks brand new. Highly recommend.”
Linda K.Homeowner, Oakwood
✓ VerifiedMost residential water damage restoration jobs in Bryan TX run $1,200 to $4,500 for extraction and drying, with repairs adding $800 to $3,000 depending on materials. A small appliance leak might cost $1,200 to $1,800. A slab leak affecting multiple rooms can hit $6,000 or more. We provide a written scope before work begins, and we bill your insurance directly when coverage applies.
Yes. We answer calls 24/7 and dispatch crews across Bryan, TX within 60 to 90 minutes for emergency residential water damage restoration. Whether it's a burst pipe at 2 a.m. or a sewage backup on a Sunday, we respond. Call (979) 325-7976 and a real person will pick up, not an answering service.
Extraction takes two to four hours. Structural drying typically runs three to five days, depending on how much water was absorbed and what materials got wet. Drywall and insulation dry faster than hardwood flooring or carpet padding. Repairs add another three to seven days. We monitor moisture daily and don't remove equipment until your home tests dry.
Shut off the water source if you can, then call us at (979) 325-7976. Don't run a household vacuum on standing water, and don't turn on ceiling fixtures if the ceiling is wet. Move furniture and electronics off wet carpet if it's safe. We handle the rest, including documentation for your insurance claim and full repairs.
Water spreads fast and mold starts within 24 to 48 hours. Call (979) 325-7976 now and we'll dispatch a crew to your Bryan home. We're available 24/7, we work with your insurance, and we don't leave until your home is dry.
Call Now (979) 325-7976 →If you have water damage, call us at (979) 325-7976. We answer 24/7 and dispatch crews around the clock. If you prefer email, send us a message at info@bryanrestorationpros.com and we will get back to you quickly. We serve all of Bryan and Brazos County, including ZIP codes 77801, 77802, 77803, 77805, 77807, and 77808.